Clear Maclock - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring MAC Locking

14.3.9.12 clear maclock

Use this command to clear MAC locking from one or more static MAC addresses.
clear maclock {all | mac-address port-string}
Syntax Description
all
mac_address
port_string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear MAC locking between MAC address 00-a0-c9-0d-32-11 and port
fe.2.3:
Matrix(rw)->clear maclock 00-a0-c9-0d-32-11 fe.2.3
14-132 Matrix NSA Series Configuration Guide
Clears all static MAC locking for one or more ports.
Specifies the MAC address for which the MAC locking
will be cleared.
Specifies the port on which to clear MAC locking. For a
detailed description of possible port_string values, refer
to Section 4.1.1.