Clear Maclock Firstarrival - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring MAC Locking
14.3.9.8

clear maclock firstarrival

Use this command to reset the number of first arrival MAC addresses allowed per port to the default
value of 600.
clear maclock firstarrival port-string
Syntax Description
port_string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset MAC first arrivals on fe.2.3:
Matrix(rw)->clear maclock firstarrival fe.2.3 6
14-128 Matrix NSA Series Configuration Guide
Specifies the port on which to reset the first arrival value.
For a detailed description of possible port_string values,
refer to Section 4.1.1.