Show Cep Connections - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.8.1

show cep connections

Use this command to display all learned CEPs.
show cep connections port-string
Syntax Description
port-string
Command Defaults
None
Command Mode
Read-Only.
Example
This example shows how to display CEP connections for port fe.1.21:
Matrix>show cep connections fe.1.21
Connection Info for fe.1.21
Endpoint Type
Policy Index
Discovery Time
Firmware Version
Address Type
Endpoint IP
Endpoint MAC
Configuring Convergence End Points (CEP) Phone Detection
Displays CEP status for one or more ports. For a detailed
description of possible port-string values, refer to
Section 4.1.1.
h323
3
MON FEB 06 02:31:42 2006
unknown
unavailable
00:04:0d:01:f8:35
Matrix NSA Series Configuration Guide
Security Configuration Command Set
14-103