Set Multiauth Port - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring Multiple Authentication

14.3.10.6 set multiauth port

Use this command to set multiple authentication properties for one or more ports.
set multiauth port mode {auth-opt | auth-reqd | force-auth | force-unauth} |
numusers numusers port-string
Syntax Description
mode auth-opt |
auth-reqd |
force-auth |
force-unauth
numusers
numusers
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to set the port multiple authentication mode to required on ge.3.14:
Matrix(rw)->set multiauth port mode auth-reqd ge.3.14
14-140 Matrix NSA Series Configuration Guide
Specifies the port(s)' multiple authentication mode as:
•
auth-opt — Authentication optional
•
auth-reqd — Authentication required
•
force-auth — Authentication considered
•
force-unauth — Authentication disabled
Specifies the number of users allowed authentication on
port(s).
Specifies the port(s) on which to set multiple authentication
properties.