Show Cep Port - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring Convergence End Points (CEP) Phone Detection
14.3.8.4

show cep port

Use this command to display enable status of all supported CEP types.
show cep port port-string
Syntax Description
port-string
Command Defaults
None
Command Mode
Read-Only.
Examples
This example shows how to display CEP status information for port fe.1.21:
Matrix>show cep port fe.1.21
Port
----------
fe.1.21
14-106 Matrix NSA Series Configuration Guide
Displays CEP status for one or more ports. For a detailed
description of possible port-string values, refer to
Section 4.1.1.
H323 Siemens
-------- --------
enabled enabled
Cisco SIP
-------- --------
enabled disabled