Show Maclock Stations - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.9.2

show maclock stations

Use this command to display MAC locking information about end stations connected to the device.
show maclock stations [firstarrival | static][port-string]
Syntax Description
firstarrival
static
port_string
Command Defaults
If no parameters are specified, MAC locking information will be displayed for all
end stations.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display MAC locking information for the end stations connected to all
Fast Ethernet ports in module 2:
Matrix(rw)->show maclock stations fe.2.*
Port Number
------------
fe.2.3
fe.2.3
fe.2.6
fe.2.6
fe.2.9
fe.2.12
fe.2.14
(Optional) Displays MAC locking information about end
stations first connected to MAC locked ports.
(Optional) Displays MAC locking information about
static (management defined) end stations connected to
MAC locked ports.
(Optional) Displays end station information for specified
port(s). For a detailed description of possible port_string
values, refer to
MAC Address
-----------------
00-10-a4-e5-08-4e
08-00-20-7c-e0-db
00-60-08-14-4b-15
08-00-20-20-32-4b
08-00-20-77-aa-80
00-03-ba-08-4c-f0
00-01-f4-2c-ad-b4
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Section 4.1.1.
Status
--------------
active
active
active
active
active
active
active
Configuring MAC Locking
State
--------------
first learned
first learned
first learned
first learned
first learned
first learned
first learned
14-121