Dumb Terminal Service - 3Com 3032 Configuration Manual

3com 3032: user guide
Hide thumbs Also See for 3032:
Table of Contents

Advertisement

60
C
4: T
HAPTER
ERMINAL
Typical Example of
Terminal Message
Service Configuration
Dumb Terminal
Service
Configure Dumb
Terminal Service
S
ERVICE
Display the current status of terminal message service
#
Input the send command in system view.
[Router] send
Enter message, end with CTRL/Z; abort with CTRL/C:
#
Input the contents of the message that the terminal will send.
hello world #
end message? [confirm]
Press Enter, Ctrl+W, y, or Y to confirm the sending. Press Ctrl+C or other characters
to give up the sending.
When the asynchronous serial port (such as synchronous/synchronous serial port,
AUX port) of the router operates in flow mode, the command line interface (CLI)
of the router can be used to carry out configuration of the router. This is achieved
by directly connecting the RS-232 serial port with the asynchronous serial port of
the router. This is called the dumb terminal operation mode.
As shown in the diagram below, the user can connect with any asynchronous
serial port and log in to the router by running the hyper terminal on PC to carry
out the configuration management of the router.
Figure 26 Configuration management through dumb terminal
PC
The typical method of terminal access is:
The asynchronous port working under the flow mode is connected to the
RS-232 serial port via dedicated line to enter the router command line interface
thereby providing another mode of configuring routers besides the mode of
console port and Telnet mode.
Based on the dumb terminal, other applications can be built, for instance,
logging on to other equipment by executing the Telnet command.
Follow these steps to configure a dumb terminal service.
1 Configure dumb terminal service
For the synchronous/asynchronous serial port,
, and
flow
undo modem
Perform the following configuration in the interface view.
Table 43 Configure dumb terminal service
Operation
(Enter <Ctrl+W> to terminate the message input )
RS232 Serial Port
Quidway Series Router
should be set first.
send status
Asynchronous Port
,
physical-mode async
Command
async mode

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

303430333035304030413036 ... Show all

Table of Contents