Show Call Active Fax; Common Voice Port Configuration Commands; Configure Voice-Port - Avaya 2330 Reference Manual

Table 396: Variable definitions
passthrough {g711ulaw | g711alaw}
[no]
Example
AG/configure/voice/service/voip# modem passthrough g711ulaw

show call active fax

Use this command to display call information for fax calls in progress.
Syntax
show call active fax
Example
AG# show call active fax

Common voice port configuration commands

configure voice-port

Use this command to configure the voice port on the given card.
This command also provides access to the voice-port subtree.
Syntax
voice-port <slot/[<subslot/]port[:<d-channel>]>
Command Line Reference
Variable Value
Specifies which high-bandwidth codec the
modem stream uses:
• g711ulaw: uses the G.711 u-law codec.
• g711alaw: uses the G.711 a-law codec
Disables modem pass-through.
show call active fax
August 2013 361