Active Ch/Trace Block - Agilent Technologies ENA Series User Manual

Overview of Functions
Front Panel: Names and Functions of Parts

3. ACTIVE CH/TRACE Block

A group of keys for selecting active channels and traces. For more on the concepts of
channels and traces, see "Setting Channels and Traces" on page 61.
Key
Key
Key
Key
32
Selects the next channel as the active channel. (Each time
the key is pressed causes the active channel to step up from
the channel with the currently designated number to one
with a larger channel number.) A channel must be active
before you can define such parameters as the sweep range.
To change the settings for a channel, use this key to first
make the channel active.
Selects the previous channel as the active channel. (Each
time the key is pressed causes the active channel to step
down from the channel with the currently designated
number to one with a smaller channel number.)
Selects the next trace as the active trace. (Each time the key
is pressed causes the active trace to step up from the trace
with the currently designated number to one with a larger
channel number.) A trace must be active before you can
define measurement parameters and other settings. To
change the settings for a trace, use this key to first make the
trace active.
Selects the previous trace as the active trace. (Each time the
key is pressed causes the active trace to step down from the
trace with the currently designated number to one with a
smaller trace number.)
Chapter 2