Agilent Technologies ENA Series User Manual page 729

Rf network analyzers
Hide thumbs Also See for ENA Series:
Table of Contents

Advertisement

Key Operation
(Continued)
Misc Setup
Opens a control panel window.
Control Panel...
Returns to the softkey display screen one level higher.
Return
Turns the backlight for the LCD screen on/off.
Backlight
Displays the firmware revision information in a dialog box.
Firmware Revision
Displays softkeys for maintenance services.
Service Menu
Displays softkeys for self diagnosis functions.
Test Menu
Executes an internal test.
Power On Test
Executes a display test.
Display
Tests the front panel keys (hardkeys).
Front Panel
Executes calibration of the touch screen.
Adjust Touch
Screen
Returns to the softkey display screen one level higher.
Return
Turns ON/OFF error correction, which uses system calibration data. If
System Correction
user calibration using [Cal] is executed properly and the error
correction is valid, you can turn off system error correction and reduce
measurement time.
Turns ON/OFF the avoid spurious mode.
Avoid Spurious
Turns ON/OFF the high temperature measurement mode. When the
High Temperature
high temperature measurement mode is turned on, drift error can be
reduced in the ambient temperature range of 28×C to 33×C. If you use
the analyzer within the range of 23×C ± 5×C, you must turn off this
function.
Turns ON/OFF the initial source port control function.
Init Src Ctrl
Display softkeys for the initial source port control function.
Init Src Port
Selects set port to 1.
1
Selects set port to 2.
2
Selects set port to 3.
3
Selects set port to 4.
4
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for the security level of the frequency blank display function.
Security Level
Turns off the frequency blank display function.
None
Turns on the frequency blank display function (security level : LOW).
Low
Turns on the frequency blank display function (security level : HIGH).
High
Returns to the softkey display screen one level higher.
Cancel
Appendix D
Function
Softkey Functions
System Menu
SCPI Command
None
:SYST:BACK
*IDN?
None
None
None
None
:SYST:CORR
:SENS{1-16}:SWE:ASP
:SYST:TEMP:HIGH
:SYST:ISPC
:SYST:ISPC:PORT 1
:SYST:ISPC:PORT 2
:SYST:ISPC:PORT 3
:SYST:ISPC:PORT 4
:SYST:SEC:LEV NON
:SYST:SEC:LEV LOW
:SYST:SEC:LEV HIGH
723

Advertisement

Table of Contents
loading

This manual is also suitable for:

E5070bE5071b

Table of Contents