Agilent Technologies ENA Series User Manual page 359

Y: Recall is possible.
*1.Includes E5070A equipped with power sweep feature.
*2.Includes E5071A equipped with power sweep feature.
Compatibility between models that have different options (number of ports and power
range expansion)
• If the stored data is "state only (
smaller number of ports can be recalled with a model having a larger number of
ports, but the opposite is not possible.
• Files saved with a model not having the power range expansion feature can be
recalled with a model having the power range expansion feature, but the opposite is
not possible.
Power range expansion
Number of ports
Option number
Without 2 213
3 313
4 413
Saved
file
With 2 214
3 314
4 414
Y: Recall is possible.
Y/c: Only when the stored data is "state only (
Compatibility when the maximum number of channels/traces is different
• You cannot recall files saved by specifying all channels/traces (
target.
• If the number channels/traces at recall does not exceed that at save, you cannot
recall files saved by specifying the displayed channel/trace (
target.
Compatibility when the firmware version is different
• Files that are saved with later firmware versions cannot be recalled by prior
firmware versions.
• Because Auto Power Range set function is added in firmware version 3.60, when
recalling files that are saved with lower firmware versions, Auto Power Range set
function is turned on with 3.60 and above firmware versions.
• When Files that are saved with 3.54 and below include calibration data, only states
and trace data are recalled with 3.60 and later firmware versions.
Compatibility when the system spec. version (available with ":SERV:SREV?") is
different
*1.Except for options 213, 313, and 413.
Chapter 10
Saving and Recalling Instrument State
N: Recall is impossible.
)," files saved with a model having a
State Only
Recalling
Without
2 3 4
213 313 413
Y Y/c Y/c
N Y Y/c
N N Y
N N N
N N N
N N N
N: Recall is impossible.
)," recall is possible.
State Only
Disp Only
Data Output
With
2 3 4
214 314 414
Y Y/c Y/c
N Y Y/c
N N Y
Y Y/c Y/c
N Y Y/c
N N Y
) as the save
All
) as the save
*1
353