Specifying Computer Name - Agilent Technologies ENA Series User Manual

Step 8. In the Internet Protocol (TCP/IP) Properties dialog box, click the
13-13).
Step 9. In the Local Area Connection Properties dialog box, click the
13-12).
Step 10. In the Local Area Connection Status dialog box, click the
Step 11. Click the × button (2 in Figure 13-10) in the upper right of the Network and Dial-up
Connections window.

Specifying computer name

Follow these steps to specify the computer name:
Step 1. Press
Step 2. Press
Step 3. Press
Step 4. Press
Step 5. The System Properties dialog box (Figure 13-14) appears. Click the
in Figure 13-14).
Figure 13-14 System Properties dialog box
Chapter 13
Setting and Using the Control and Management Functions
.
.
Misc Setup
.
Network Setup
.
Network Identification
Configuring the Network
button (6 in Figure
OK
button (3 in Figure
OK
button (3 in Figure 13-11).
Close
button (1
Properties
437