Define The Setup For A Limit Table - Agilent Technologies ENA Series User Manual

Setup Description
Moving Marker 1 to the peak in the pass band
*1. If you cannot move the marker to the desired peak, use
In the example of Figure 15-15, return loss (response value of Marker 1) is 13.80 dB.
Step 6. Turn on the marker table display.
Setup Description
Marker table display: ON
Figure 15-15 Analyzing duplexer parameters

10. Define the Setup for a Limit Table

Follow the steps below to make entries in the limit table.
Step 1. Display the limit table for Trace 1 (S
Setup Description
Activating Trace 1
Displaying a limit table
Chapter 15
peak deviation and then execute the search again. (Example:
).
Measurement Examples
Evaluating a Duplexer
Key Operation
- |
Peak Search Left Search Right
many times as necessary)
Peak Excursion
Peak Excursion
Key Operation
-
Marker Table
).
13
Key Operation
-
Limit Test
(press as
*1
to change the
-
(Turn it )
ON
-
Edit Limit Line
501