Agilent Technologies ENA Series User Manual page 74

Setting Measurement Conditions
Setting Channels and Traces
Table 3-2 Parameters and setup items they control
Parameter
IF bandwidth
Calibration
Marker
Analysis
Fixture simulator
Time domain
Parameter conversion
Limit test
Saving and recalling data
Macro
System
Printing/Saving display
Screen/Beeper/GRIB settings/Network
Settings/Date & Time/Key
Lock/Backlight/Firmware
Revision/Service menu
Preset
*1. for the analyzer.
Hold All Channels
*2. and scale
Auto Scale All
*3.Turning the marker table display on or off applies to the entire analyzer. On the other hand, the sweep range setting
of the marker must be performed for each channel. In the preset condition, marker coupling is enabled and marker
settings and movements are effective for all traces on a channel.
*4.The balanced-unbalanced conversion function (
68
Controlled Setup Items
Analyzer Channel
√
√
*4
√
( )
√
√
√
√
must be set up in rectangular form for each channel.
Divisions
BalUn ON/OFF
Setup Key(s)
Trace
-
IF Bandwidth
*3
√
( )
-
Fixture Simulator
√
-
Gating
-
Transform
√
-
Conversion
√
-
Limit Test
) must be turned on or off for each trace.
Chapter 3