Enabling Port Extensions And Loss Values - Agilent Technologies ENA Series User Manual

2. Setting a DC loss value
Step 1. Press or
loss value.
Step 2. Press .
Step 3. Press
Port Extensions
Step 4. Press .
Loss
Step 5. Press to select the port for which you want to set a DC loss value.
Select Port
Step 6. Press , and enter a DC loss value.
Loss at DC
Step 7. If you want to set a DC loss value for other ports, repeat Step 5 to Step 6.

Enabling port extensions and loss values

Step 1. Press or
port extensions and loss values.
Step 2. Press .
Step 3. Press
Port Extensions
Step 4. Turn on
Extensions
Chapter 12
Setting Port Extensions and Loss Values
to activate the channel for which you want to set a DC
.
to activate the channel for which you want to enable
.
.
Optimizing Measurements
403