Agilent Technologies ENA Series User Manual page 728

Softkey Functions
System Menu
Key Operation
(Continued)
Misc Setup
Color Setup
Normal
Displays softkeys for setting up the color of the memory trace of Trace
Mem Trace 1
1. The lower-level softkeys are the same as those for
:
Displays softkeys for setting up the color of the memory trace of Trace
Mem Trace 9
9. The lower-level softkeys are the same as those for
Displays softkeys for setting up the color of the graticule labels and the
Graticule
outer frame of graphs. The lower-level softkeys are the same as those
Main
for
Data Trace 1
Displays softkeys for setting up the color of the graticule lines in
Graticule Sub
graphs. The lower-level softkeys are the same as those for
Displays softkeys for setting up the color of the fail label of the limit
Limit Fail
test. The lower-level softkeys are the same as those for
Displays softkeys for setting up the color of the limit line of the limit
Limit Line
test. The lower-level softkeys are the same as those for
Displays softkeys for setting up the color of the background. The
Background
lower-level softkeys are the same as those for
Resets the color to the factory seting state.
Reset Color
Returns to the softkey display screen one level higher.
Return
Displays softkeys for setting up the color of the inverted display. The lower-level softkeys are the same as those for
Invert
.
Nomal
Returns to the softkey display screen one level higher.
Return
Displays softkeys for setting up the maximum numbers of the channels and traces.
Channel/Trace
Setup
Sets the maximum number of channels to 1 and the maximum number
1 Channels
of traces to 4.
4 Traces
Sets the maximum number of channels to 2 and the maximum number
2 Channels
of traces to 4.
4 Traces
Sets the maximum number of channels to 4 and the maximum number
4 Channels
of traces to 16.
16 Traces
Sets the maximum number of channels to 9 and the maximum number
9 Channels
of traces to 9.
9 Traces
Sets the maximum number of channels to 12 and the maximum
12 Channels
number of traces to 6.
6 Traces
Sets the maximum number of channels to 16 and the maximum
16 Channels
number of traces to 4.
4 Traces
Sets the maximum number of channels to 1, the maximum number of
1 Ch / 4 Tr
traces to 4, and the upper limit of the measurement point to 20001.
200001 Points
Returns to the softkey display screen one level higher.
Return
Displays softkeys to executes the preset function.
Preset Setup
Displays the softkeys to set the type of preset to be executed.
State
Executes the preset function to recall the factory state.
Factory
Executes the preset function to recall a user-specified state.
User
Toggles on/off whether to display the softkeys for confirmation at the
Confirm
execution of the preset function.
722
Function
:
.
Data Trace 1
SCPI Command
:DISP:COL{1-2}:TRAC1:MEM
.
Data Trace 1
:DISP:COL{1-2}:TRAC9:MEM
.
Data Trace 1
:DISP:COL{1-2}:GRAT1
:DISP:COL{1-2}:GRAT2
.
Data Trace 1
:DISP:COL{1-2}:LIM1
.
Data Trace 1
:DISP:COL{1-2}:LIM2
.
Data Trace 1
:DISP:COL{1-2}:BACK
.
:DISP:COL{1-2}:RES
None
None
None
None
None
None
None
None
None
None
:
Appendix D