Agilent Technologies ENA Series User Manual page 609

*1.The test port dynamic range is calculated as the difference between the test port rms noise floor and the source
maximum output power. The effective dynamic range must take measurement uncertainty and interfering signals
into account.
*2.May be limited to 90 dB at particular frequencies below 350MHz or above 4.25GHz due to spurious receiver
residuals.
Table A-5 Test Port Output Power
Description
Level Accuracy (at 23°C±5°C)
300 kHz to 10 MHz
10 MHz to 8.5 GHz
Level Accuracy (high temperature mode: ON)
300 kHz to 8.5 GHz
Level Accuracy (swept mode)
300 kHz to 4.25 GHz
4.25 GHz to 8.5 GHz
Level Linearity (23°C±5°C)
10 MHz to 4.25 GHz
4.25 GHz to 6 GHz
6 GHz to 8.5 GHz
Level Linearity (high temperature mode: ON)
300 kHz to 4.25 GHz
4.25 GHz to 6 GHz
6 GHz to 8.5 GHz
Level Linearity (swept mode)
300 kHz to 4.25 GHz
4.25 GHz to 6 GHz
6 GHz to 8.5 GHz
Range
Standard
300 kHz to 4.25 GHz
4.25 GHz to 6 GHz
6 GHz to 8.5 GHz
Extended Power Range (with option 214, 314,
414)
300 kHz to 4.25 GHz
4.25 GHz to 6 GHz
6 GHz to 8.5 GHz
Appendix A
*1
Specification
±0.650 dB (at 0 dBm, 50 MHz
absolute)
±1.0 dB (at 0 dBm, relative to 50
MHz reference)
±0.75 dB (at −15 dBm to 10 dBm)
±0.75 dB (at −15 dBm to 8 dBm)
±0.75 dB (at −15 dBm to 6 dBm)
−15 dBm to 10 dBm
−15 dBm to 8 dBm
−15 dBm to 6 dBm
Manual Changes
Manual Changes
Supplemental Information
±1.0 dB (at 0 dBm, relative to 50
MHz reference)
±0.8 dB (at 0 dBm, 50 MHz
absolute)
±1.5 dB (at 0 dBm, relative to 50
MHz reference)
±2.5 dB (at 0 dBm, relative to 50
MHz reference)
±3.5 dB (at 0 dBm, relative to 50
MHz reference)
±1.5 dB (at −15 dBm to 10 dBm)
±2.0 dB (at −15 dBm to 8 dBm)
±2.0 dB (at −15 dBm to 6 dBm)
±1.5 dB (at −15 dBm to 10 dBm)
±3 dB (at −15 dBm to 8 dBm)
±3 dB (at −15 dBm to 6 dBm)
−50 dBm to 10 dBm
−50 dBm to 8 dBm
−50 dBm to 6 dBm
(non-harmonics spurious may
limit power range)
603