Save/Recall; Test Sequence Program; Outputting To A Printer/Plotter; Gpib Interface - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Replacing the 8753ES with the E5070B/E5071B

Important Functional Differences

Save/Recall

For storing data, the 8753ES is provided with an internal register, internal disk drive

(floppy disk), and external disk drive (connected through the GPIB). In contrast, the

E5070B/E5071B provides an internal hard disk drive, and an internal disk drive (floppy

disk). While the 8753ES can save or recall the device setup, screen color settings, and test

sequences, the E5070B/E5071B is able to save or recall the instrument setup, segment

sweep table, and limit line table as well as VBA projects. The 8753ES saves display data in

JPEG format while the E5070B/E5071B supports the Windows

Bitmap (BMP) and

Portable Network Graphics (PNG) format.

Although the 8753ES supports the test sequence program, the E5070B/E5071B provides

an environment for developing VBA programs for automatic measurement.

The 8753ES enables you to establish the print area covering an entire sheet or just a 1/4

sheet, and to define traces, the reference line, and colors of warning messages. In contrast,

the E5070B/E5071B supports only full-sheet output, and an on/off setting for highlighting

the entire screen in connection with color setup.

The 8753ES supports parallel ports, serial ports, and GPIB as printer ports, although the

E5070B/E5071Bsupports only parallel- and USB-connected printers.

While the 8753ES uses pass control to pass the controller information to an external PC or

instrument, the E5070B/E5071B does not support this function.

Although the 8753ES does not support a LAN interface, support for LANs is standard on

the E5070B/E5071B.

The 8753ES is provided with Take4 mode, mixer measurement function, and harmonics

measurement function (Option 002), but the E5070B/E5071B is not provided with these

E5070b E5071b