Agilent Technologies ENA Series User Manual page 459

Step 6. The following screen appears. Check that Floppy is selected (highlighted) (if Floppy is not
selected, select it with
Step 7. The message as shown below appears. Press
factory recovery, press
Agilent Technologies System Utilities
Recovery & Backup Options for the E5070/71B
Choose One of the following:
_________________________________________________________________
1. Recover Factory Backup Image
2. Create User Backup Image
3. Recover User Backup Image
4. Exit
_________________________________________________________________
Enter a Choice: _
NOTE If the above message does not appear, the instrument or the disk for the system recovery is
at fault; contact your local Agilent customer center listed at the end of this manual or
distributor.
Chapter 13
Setting and Using the Control and Management Functions
of the keyboard), and press
of the keyboard. If you want to cancel the
here.
System Recovery
of the keyboard.
453