Calibration - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Controlling E5091A

Calibration

Follow these steps to perform calibration with the E5091A connected:

Step 1. Press

active channel.

Step 2. Follow "Displaying the E5091A properties" on page 479 to display the E5091A properties.

Step 3. According to the procedures in Chapter 4, "Calibration," on page 93, perform the

calibration. Check the corresponding E5091A test ports shown in the calibration properties

as the port names of the E5070B/E5071B are displayed on the calibration menu, connect

the calibration standard to the corresponding test ports of the E5091A, and perform the

calibration.

) to set the channel that you want to calibrate to the

E5070b E5071b