To Select The Active Trace - Agilent Technologies 35670A Operator's Manual

Displaying Measurement Data

To select the active trace

1
Press [
2
If you want to activate a single trace, press one of the following softkeys: [
or [
3
If you want to activate two traces at once, press one of the following softkeys: [
[
C D
4
If you want to activate all four traces at once, press [
The analyzer has four trace buffers that are independent of the input channels:
trace A, trace B, trace C, and trace D. The Active Trace menu lets you activate these
buffers so you can modify them separately or in groups—using softkeys under the
[
Meas Data
is only displayed temporarily: after you press one of its softkeys (or the [
hardkey), the analyzer redisplays the previous menu.
Some operations can only act on a single trace—even when multiple traces are active.
For example, the [
Operations like this act on the "most active" trace if multiple traces are active:
•
•
Titles for active traces are
highlighted.
8-2
].
Active Trace
].
D
].
], [
Trace Coord
SAVE TRACE
Trace A is the most active when you select [
Trace C is the most active when you select [
], [ ], [ ], and [
Scale Marker
] softkey can only be used to save a single trace.
A B
C D
].
A B C D
] hardkeys. The menu
Marker Fctn
] or [ ].
A B C D
].
In the Active Trace menu, a box
surrounds the softkey selecting the
active traces.
Agilent 35670A
Operator's Guide
], [ ], [ ],
A B C
] or
A B
]
Rtn