Connecting E5070B/E5071B And E5091A; Required Devices - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Controlling E5091A

Connecting E5070B/E5071B and E5091A

The devices required to connect the E5070B/E5071B to the E5091A are listed below.

Connecting E5070B/E5071B and E5091A

As shown in Figure 14-1, connect the USB cable between the rear panel of the

E5070B/E5071B and that of the E5091A.

Connection between E5070B/E5071B and E5091A (rear view)

Do not switch on/off devices connected via the USB ports (front or rear panel) or

connect/disconnect devices to the USB ports while the E5070B/E5071B is measuring with

E5070B/E5071B

N-type to N-type cable (supplied with the E5091A, Agilent part number: 8120-4782)

USB cable (supplied with the E5091A, Agilent part number: 8121-0770)

E5070b E5071b