Enabling control of E5091A
If you enable control of the E5091A, it becomes possible to switch the measurement path
and the output function of the control line of the E5091A during measurement.
NOTE
The E5070B/E5071B needs the additional time (about 3 ms) to control the E5091A when
you have enabled control of the E5091A.
Operational procedure
Step 1. Press
Step 2. After the execution of "Selecting ID for E5091A" on page 476 and "Selecting the E5091A
Model" on page 477, press
NOTE
The enable (
for all channels.
Chapter 14
-
Multiport Test Set Setup
to enable (
Control
)/disable (
) setting of the control function of the E5091A is executed
ON
OFF
Controlling E5091A
Setting the E5091A
to display the E5091A setup menu.
) control of the E5091A.
ON
481