Agilent Technologies ENA Series User Manual page 723

Key Operation
(Continued)
Frequency Offset
External Source
Offset
Set the offset for the base frequency
Set the start frequency.
Start
Set the stop frequency.
Stop
Turns on/off of the external signal source control with GPIB.
Control
Set the power level.
Power
Set the power slope.
Slope [xdB/GHz]
Turns on/off of the power slope.
Slope [ON/OFF]
Returns to the softkey display screen one level higher.
Return
Turns on/off of the avoid spurious.
Avoid Spurious
Displays the softkey to select the x-axis frequency data.
X-Axis
Base
Selects base frequency
Selects source port frequency when the frequency offset turns on.
Stimulus
Selects receiver port frequency when the frequency offset turns on.
Response
Normal
Selects base frequency
Selects RF+LO frequency when the frequency offset turns off.
RF + LO
Selects RF-LO frequency when the frequency offset turns off.
RF - LO
Selects LO-RF frequency when the frequency offset turns off.
LO - RF
Returns to the softkey display screen one level higher.
Cancel
Returns to the softkey display screen one level higher.
Return
Returns to the "E5070B/E5071B Menu (Top Menu)" on page 646.
Return
*1.Only with Options 214, 314, and 414.
*2.The base frequency is the frequency that is set by using
Appendix D
Function
*2
.
*2
when the frequency offset turns on.
*2
when the frequency offset turns off.
and
Softkey Functions
Sweep Setup Menu
SCPI Command
:SENS{1-16}:OFFS:LOC:OFFS
:SENS{1-16}:OFFS:LOC:STAR
:SENS{1-16}:OFFS:LOC:STOP
:SENS{1-16}:OFFS:LOC:CONT
:SENS{1-16}:OFFS:LOC:POW
:SENS{1-16}:OFFS:LOC:POW:SLOP
:SENS{1-16}:OFFS:LOC:POW:SLOP
:STAT
:SENS{1-16}:OFFS:ASP
:CALC{1-16}:OFFS:XAX
:CALC{1-16}:OFFS:XAX
:CALC{1-16}:OFFS:XAX
:CALC{1-16}:MIX:XAX
:CALC{1-16}:MIX:XAX
:CALC{1-16}:MIX:XAX
:CALC{1-16}:MIX:XAX
keys.
717