Agilent Technologies ENA Series User Manual page 81

Figure 3-6 Available power level and selected power range with Auto Power Range set function
ON (when maximum frequency is over 3 GHz (for E5071B only))
Setting the level
Step 1. Press
power level.
Step 2. Press
Step 3. Press
Step 4. Press
ON
OFF
NOTE
The power level of port 1 is coupled with the power level for all ports.
NOTE If you change the on/off setting of the level coupling, all ports are automatically changed to
the same level value as that of port 1.
Step 5. When setting level for all ports (
1. Press
2. Enter the power level using the ENTRY block keys on the front panel.
When setting level for each port (
1. Press
2. Press the softkey corresponding to each port (
*1. The available power level over 3 GHz changes according to measurement frequencies.
Chapter 3
or
.
.
Power
and select the on/off setting of the level coupling for all ports.
Port Couple
The same power level is outputted to all ports.
A specific power level is outputted to each port independently.
.
Power
.
Port Power
Setting Measurement Conditions
Setting Stimulus Conditions
to select the channel for which you want to set the
)
Port Couple ON
)
Port Couple OFF
to
Port 1 Power
*1
).
Port 4 Power
75