Agilent Technologies ENA Series User Manual page 361

Saving Instrument State
Follow the procedure below to save internal data from the E5070B/E5071B.
Step 1. Press
Step 2. Press
Step 3. When you want to use a pre-defined file name (State01.sta - State08.sta,
Autorec.sta)
Press
NOTE
If "A:\Autorec.sta" or "D:\Autorec.sta" is found on the system at startup, the
E5070B/E5071B is automatically configured using the saved settings. When both files are
found, "A:\Autorec.sta" is recalled. To disable the auto recall function, delete the
Autorec.sta files.
NOTE An asterisk (*) in the upper right of the softkey indicates that the corresponding file of the
softkey already exists. If you save into the existing file, the existing file is copied as
"backup.sta" and then overwritten.
When you want to use another file name or a file name on the floppy disk
1. Press
dialog box.
2. Select the folder and input a file name using the external keyboard and mouse.
3. Click
Figure 10-1 Save As dialog box
Chapter 10
.
.
Save State
- or
State01 State08 Autorec
to open the Save As dialog box. Figure 10-1 illustrates the Save As
File Dialog...
Save
Saving and Recalling Instrument State
.
Data Output
355