Agilent Technologies ENA Series User Manual page 600

Manual Changes
Manual Changes
Figure A-9 Example of performing multiport TRL/LRM calibration
Step 5. Press the
Step 6. Connect the Reflection standard to test port 1 and press the
reflection measurement is performed, and an asterisk appears at the
Step 7. Connect the Reflection standard to test port 2 and press the
reflection measurement is performed, and an asterisk appears at the
Step 8. Connect the Reflection standard to test port 3 and press the
reflection measurement is performed, and an asterisk appears at the
and then a check mark [v] also appears on the
Step 9. Press the
Step 10. Connect the Match standard to test port 1 and press the
measurement is performed, and an asterisk appears at the
Step 11. Connect the Match standard to test port 2 and press the
measurement is performed, and an asterisk appears at the
Step 12. Connect the Match standard to test port 3 and press the
measurement is performed, and an asterisk appears at the
check mark [v] also appears on the
Step 13. Press the
Step 14. Connect the Line 1 standard between test ports 1 and 2 and press the
The line measurement is performed, and an asterisk appears at the
Step 15. Connect the Line 1 standard between test ports 1 and 3 and press the
The line measurement is performed, and an asterisk appears at the
then a check mark [v] also appears on the
Step 16. Press the
Step 17. Connect the Line 2 standard between test ports 1 and 2, and press the
594
button (4 in Figure A-9).
Reflection
button (5 in Figure A-9).
Match
Match
button (6 in Figure A-9).
Line1
button (7 in Figure A-9).
Line2
[ ]Reflection1
[ ]Reflection1
[ ]Reflection2
[ ]Reflection2
[ ]Reflection3
[ ]Reflection3
button.
Reflection
button. The match
[ ]Match1
[ ]Match1
button. The match
[ ]Match2
[ ]Match2
button. The match
[ ]Match3
[ ]Match3
button.
[ ]Line1 1-2
[ ]Line1 1-3
button.
Line1
button. The
button.
button. The
button.
button. The
button
button.
button.
button and then a
button.
[ ]Line1 1-2
button.
button.
[ ]Line1 1-3
button and
button.
[ ]Line2 1-2
Appendix A