Setting Ip Address - Agilent Technologies ENA Series User Manual

Step 6. When switching from disable to enable:
Double-click the Local Area Connection icon (1 in Figure 13-10) in the Network and
Dial-up connections window to enable the network connection function.
When switching from enable to disable:
Double-click the Local Area Connection icon (1 in Figure 13-10) in the Network and
Dial-up Connections window. The Local Area Connection Status dialog box (Figure
13-11) appears. Click the
connection function.
Figure 13-11 Local Area Connection Status dialog box
Step 7. Click the × button (2 in Figure 13-10) in the upper right of the Network and Dial-up
Connections window.

Setting IP address

Follow these steps to set the IP address:
Step 1. Press
Step 2. Press
Step 3. Press
Step 4. Press
Step 5. Double-click the Local Area Connection icon (1 in Figure 13-10) in the Network and
Dial-up Connections window. The Local Area Connection Status dialog box (Figure
13-11) appears. Click the
Chapter 13
Setting and Using the Control and Management Functions
button (1 in Figure 13-11) to disable the network
Disable
.
.
Misc Setup
.
Network Setup
.
Network Configuration
Properties
Configuring the Network
button (2 in Figure 13-11).
435