Data Analysis
Performing Parameter Conversion of Measurement Results
Selecting Conversion Target Parameter
Step 1. Press
marker.
Step 2. Press
or
Step 3. Press
.
Step 4. Press
Conversion
Step 5. Press
.
Function
Step 6. Press the softkey corresponding to the parameter to which you want to convert the result.
When the conversion function is ON, the selected parameter is displayed in "5-5. Trace
Status Area" on page 48.
276
or
to activate the channel on which you want to use the
to activate the trace on which you want to use the marker.
.
Chapter 6