Calibration Kits; For Devices With N Type Connectors - Agilent Technologies ENA Series User Manual

Calibration Kits

Calibration kits are used to improve the accuracy of the analyzer in various measurements.
Two types of calibration kit – the coaxial mechanical calibration kit and coaxial electronic
calibration kit – are available. Each kit comes with N type connectors or 3.5 mm (SMA)
connectors.
The electronic type reduces the time required for calibration, mis-connections, and wear on
connectors since it requires fewer changes of connection than the mechanical type.
Specifications for calibration kits and the availability of particular calibration kits are
subject to change without prior notice. Contact the nearest Agilent Technology sales office
or the supplier of your analyzer for more information before placing an order.

For Devices with N Type Connectors

Coaxial Mechanical Calibration Kits
85032F Mechanical Calibration Kit N Type 50 Ω (30 kHz ~ 9 GHz)
The 85032F kit includes the following items.
Agilent Cat. No. Description
50 Ω N type (m), terminated
85032-60017
50 Ω N type (f), terminated
85032-60018
50 Ω N type (m), open
85032-60013
50 Ω N type (f), open
85032-60014
50 Ω N type (m), short
85032-60016
50 Ω N type (f), short
85032-60015
Also, the following options are available for the 85032F.
Option Agilent Cat. No.
Option 100 85032-60021
Option 200 85032-60019
Option 300 85032-60020
Option 500 85054-60001
85054-60009
Chapter 17
Measurement Accessories
Calibration Kits
Description
With a 50 Ω N type (f)-(f) adaptor.
With a 50 Ω N type (m)-(m) adaptor.
With a N type (m)-(f) adaptor.
With two 50 Ω N type (f) to 7 mm
adaptors.
With two 50 Ω N type (m) to 7 mm
adaptors.
565