Measurement Capabilities - Agilent Technologies ENA Series User Manual

Specifications and Supplemental Information

Measurement capabilities

Measurement capabilities
Number of measurement channels
Number of display windows
Number of traces
Measurement choices
Measurement parameter conversion
Data formats
Data markers
Marker functions
Marker-to functions
Time domain functions
558
Up to 16 independent measurement channels. A measurement channel is
coupled to stimulus response settings including frequency, IF
bandwidth, power level, and number of points.
Each measurement channel has a display window. Up to 16 display
windows (channels) can be displayed.
Four display modes (selectable)
16 data traces and 16 memory traces per channel at 4-channel mode
9 data traces and 9 memory traces per channel at 9-channel mode
6 data traces and 6 memory traces per channel at 12-channel mode
4 data traces and 4 memory traces per channel at 16-channel mode
Opt. 213/214: S
Opt. 313/314: S
S-parameters, Balance parameters, CMRR
Opt. 413/414: S
S , S , S
14 24
CMRR
Available to convert S-parameters into reflection impedance,
transmission impedance, reflection admittance, transmission
admittance, and 1/S.
Log magnitude, linear magnitude, phase, extended phase, positive
phase, group delay, SWR, real, imaginary, Smith chart, polar.
10 independent markers per trace. Reference marker available for delta
marker operation. Smith chart format includes 5 marker formats: linear
magnitude/phase, log magnitude/phase, real/imaginary, R + jX, and G +
jB. Polar chart format includes 3 marker formats: linear
magnitude/phase, log magnitude/phase, and real/imaginary.
Max value, Min value, peak, peak left, peak right, target, target left,
Marker search
target right, bandwidth parameters with user-defined bandwidth values.
Set start, stop, center to active marker stimulus value; set reference to
active marker response value; set electrical delay to group delay at
active marker.
Search range User definable.
Tracking Performs marker search continuously or on demand.
Transformation Selectable transformation type from bandpass, lowpass impulse,
lowpass step.
Selectable window from maximum, normal and minimum.
Gated functions Selectable gated filter type from bandpass, notch.
Selectable gate shape from maximum, normal and wide.
, S , S , S
11 21 12 22
, S , S , S , S , S
11 21 31 12 22 32
, S , S , S , S , S
11 21 31 41 12 22
, S , Mixed mode S-parameters, Balance parameters,
34 44
, S , S , S , Mixed-mode
13 23 33
, S , S , S , S , S , S ,
32 42 13 23 33 43
Chapter 16