Agilent Technologies ENA Series User Manual page 277

executed. The response value of this active marker itself is the insertion loss in the
bandwidth search (
Step 2. Press
Step 3. Press
appears.
Step 4. Press
bandwidth parameters are displayed (Figure 6-14).
Bandwidth search results (defined bandwidth = −3 dB)
Figure 6-14
Chapter 6
Determining the Bandwidth of the Trace (Bandwidth Search)
).
loss
.
and enter the defined bandwidth value in the entry area that
Bandwidth Value
to turn on the bandwidth search. In the upper left of the trace display, six
Bandwidth
Data Analysis
271