Using Trace Mode; Learning The Nvp Of A Fiber - Agilent Technologies WireScope 350 User Manual

2 To set the current power value as a reference, press Set Reference.
3 To write the current data table to the results database, press Save.
4 To calibrate the Power Meter, press Calibrate.

Using Trace Mode

To turn on the Fiber SmartProbe's transmitter:

Learning the NVP of a Fiber

To learn the NVP of a fiber cable sample:
1 Connect a known length sample of the fiber to the Fiber SmartProbe.
2 On the Fiber Tools menu, press Learn Fiber NVP. The Learn Fiber
The difference is shown in the Delta field. The actual measurement is
shown in the Optical Power field.
• On the Fiber Tools menu, press Trace Mode. The FIber Trace
Mode screen displays and indicates that the transmitter is active.
The sample must be at least 50 feet (15 meters) long.
NVP screen displays. Use the Quick Setup to help configure the cable
for single ended or double ended test configuration and to provide
fiber construction details prior to the test. You may need to calibrate
using the test jumper depending on which test configuration you
@‘ƒr…‡ÃH‚qrÃs‚…ÃAvir…ÃUr†‡vt
UurÃAvir…ÃU ‚‚y†ÃHrˆ
7−7