Agilent Technologies ENA Series User Manual page 706

Softkey Functions
Marker Search Menu
Key Operation
(Continued)
Enables or disables bandwidth searching. When enabled,
Bandwidth
bandwidth parameters (Insertion loss, Low cutoff point, High
cutoff point, Center frequency, Bandwidth and Q) will be
displayed on the screen.If the Smith chart format or polar format
is used, the main response value, among the two response values,
will be used to perform searches (e.g., resistance in the
format). For details, see "Determining the Bandwidth of
(R+jX)
the Trace (Bandwidth Search)" on page 270.
Sets the bandwidth. The bandwidth in a bandwidth search is
Bandwidth Value
defined by specifying the displacement from the active marker to
the cutoff point using the response value (the value assigned to the
Y-axis in a rectangular display format).
Returns to the "E5070B/E5071B Menu (Top Menu)" on page 646.
Return
700
Function
Smith
SCPI Command
:CALC{1-16}:MARK{1-10}:BWID
:CALC{1-16}:MARK{1-10}:BWID:THR
Appendix D