Agilent Technologies ENA Series User Manual page 657

Key Operation
(Continued)
Fixture Simulator
Port Matching
Select Circuit
Adds a shunt L - shunt C type matching circuit to the port selected in the
ShuntL -
menu.
ShuntC Select Port
Adds a user-defined matching circuit to the port selected in the
User
menu. The user-defined matching circuit must be prepared in the 2-port
Touchstone data format and loaded onto the E5070B/E5071B from the
menu.
File
Returns to the softkey display screen one level higher.
Cancel
Sets the value of C for the matching circuit selected in the
C
menu for addition to the port selected in the
Sets the value of G for the matching circuit selected in the
G
menu for addition to the port selected in the
Sets the value of L for the matching circuit selected in the
L
menu for addition to the port selected in the
Sets the value of R for the matching circuit selected in the
R
menu for addition to the port selected in the
Opens a dialog box for loading a user-defined 2-port Touchstone data file.
User File
The loaded matching circuit can be added to ports by selecting
Select Circuit
Returns to the softkey display screen one level higher.
Return
Displays softkeys for setting up the port impedance conversion function. This function is included in internal
Port ZConversion
software that converts S parameters determined with a 50 W reference port impedance to S parameters for
arbitrary port impedance.
Enables or disables the port impedance conversion function.
Port
ZConversion
Sets the reference impedance (real format) of port 1.
Port 1 Z0 Real
Sets the reference impedance (complex format) of port 1.
Port 1 Z0 Imag
Sets the reference impedance (real format) of port 2.
Port 2 Z0 Real
Sets the reference impedance (complex format) of port 2.
Port 2 Z0 Imag
*1 Sets the reference impedance (real format) of port 3.
Port 3 Z0 Real
Sets the reference impedance (complex format) of port 3.
*1
Port 3 Z0 Imag
*2 Sets the reference impedance (real format) of port 4.
Port 4 Z0 Real
Sets the reference impedance (complex format) of port 4.
*2
Port 4 Z0 Imag
Returns to the softkey display screen one level higher.
Return
Appendix D
Function
Select Port
Select Port
Select Port
Select Port
menu.
Softkey Functions
SCPI Command
:CALC{1-16}:FSIM:SEND:PMC:
PORT{1-4} PLPC
:CALC{1-16}:FSIM:SEND:PMC:
Select Port
PORT{1-4} USER
User
:CALC{1-16}:FSIM:SEND:PMC:
Select Circuit
PORT{1-4}:PAR:C
menu.
:CALC{1-16}:FSIM:SEND:PMC:
Select Circuit
PORT{1-4}:PAR:G
menu.
:CALC{1-16}:FSIM:SEND:PMC:
Select Circuit
PORT{1-4}:PAR:L
menu.
:CALC{1-16}:FSIM:SEND:PMC:
Select Circuit
PORT{1-4}:PAR:R
menu.
:CALC{1-16}:FSIM:SEND:PMC:
PORT{1-4}:USER:FIL
in the
User
:CALC{1-16}:FSIM:SEND:ZCON:
STAT
:CALC{1-16}:FSIM:SEND:ZCON:
PORT1:Z0
:CALC{1-16}:FSIM:SEND:ZCON:
PORT1:REAL
:CALC{1-16}:FSIM:SEND:ZCON:
PORT1:IMAG
:CALC{1-16}:FSIM:SEND:ZCON:
PORT2:Z0
:CALC{1-16}:FSIM:SEND:ZCON:
PORT2:REAL
:CALC{1-16}:FSIM:SEND:ZCON:
PORT2:IMAG
:CALC{1-16}:FSIM:SEND:ZCON:
PORT3:Z0
:CALC{1-16}:FSIM:SEND:ZCON:
PORT3:REAL
:CALC{1-16}:FSIM:SEND:ZCON:
PORT3:IMAG
:CALC{1-16}:FSIM:SEND:ZCON:
PORT4:Z0
:CALC{1-16}:FSIM:SEND:ZCON:
PORT4:REAL
:CALC{1-16}:FSIM:SEND:ZCON:
PORT4:IMAG
Analysis Menu
651