Working with the Display
To select the active trace
1
Press [
2
Press one of the following softkeys:
[
]
A
[
]
B
[
]
C
,
[
]
[
A B
[
C D
[
A B C D
The analyzer has four trace buffers that are independent of the input channels: trace A,
trace B, trace C, and trace D. In addition to the individual traces, the following traces
can be active at the same time:
•
•
•
Trace pairs AC and BD cannot be active at the same time.
The "most active" trace data is saved during a save operation and menu selections
show the "most active" trace setup.
You have many options for selecting and displaying the contents of a trace, but you
must activate the trace before you can change these options. For example, most of the
selections under the [
Inverse video
indicates which
traces are active
18
].
Active Trace
]
]
].
A and B—trace A is the "most active" trace.
C and D—trace C is the "most active" trace.
ABCD—trace A is the "most active" trace.
Marker
] and [
] menus only affect the active trace.
Display
Agilent 35670A Quick Start Guide