Connecting Dut - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Measurement Examples

Evaluating Transmission Characteristics of a Front End Module

Step 5. Perform calibration for channels 2, 3, and 4 according to the same procedure as in Step 2 to

Because the test port assignment setting for channels 1 and 2 and that for channels 3 and 4

are the same, you need not change the ECal connection.

9. Connecting DUT

Connect the DUT as shown in Figure 15-37.

Figure 15-37

Connecting 6-port front end module

E5070b E5071b