Agilent Technologies ENA Series User Manual page 658

Softkey Functions
Analysis Menu
Key Operation
(Continued)
Fixture Simulator
Displays softkeys for setting up the network de-embedding function. Network de-embedding is a function used to
De-Embedding
eliminate any user-defined network (with a reference impedance of 50 W) supplied in a 2-port Touchstone data
file, from desired test ports to extend the calibration plane.
Enables or disables the network de-embedding function.
De-Embedding
Displays softkeys for selecting test ports for which network de-embedding will be performed.
Select Port
Selects test port 1 for performing network de-embedding.
1
Selects test port 2 for performing network de-embedding.
2
*1 Selects test port 3 for performing network de-embedding.
3
Selects test port 4 for performing network de-embedding.
*2
4
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting the type of network de-embedding to be performed on the test port selected in the
Select Type
Select Port
Does not allow network de-embedding on the test port selected in the
None
menu.
Port
De-embeds a user-defined network from the test port selected in the
User
menu. The user-defined network should be prepared in the 2-port
Port
Touchstone data format and loaded onto the E5070B/E5071B from the
menu.
File
Returns to the softkey display screen one level higher.
Cancel
Opens a dialog box for reading a 2-port Touchstone data file prepared by
User File
the user. Selecting
network.
Returns to the softkey display screen one level higher.
Return
Displays softkeys for setting up the differential matching circuit function. This function uses internal software to
*1
Diff Matching
convert the characteristics of a balanced port to those with an inserted differential matching circuit.
Enables or disables the differential matching circuit function.
Diff. Matching
Displays softkeys for selecting a balanced port to which a differential matching circuit will be added.
Select Bal Port
*2 Selects port 1 on the DUT for adding a differential matching circuit.
1
Selects port 2 on the DUT for adding a differential matching circuit.
2
*2 Selects port 3 on the DUT for adding a differential matching circuit.
3
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting the type of differential matching circuit.
Select Circuit
Does not allow a differential matching circuit to be added to the balanced
None
port selected in the
Adds a shunt L - shunt C type differential matching circuit to the port
ShuntL -
selected in the
ShuntC
Adds a user-defined differential matching circuit to the port selected in the
User
Select Bal Port
be provided in the 2-port Touchstone data format and loaded onto the
E5070B/E5071B from the
Returns to the softkey display screen one level higher.
Cancel
652
Function
menu.
in the menu will de-embed the loaded
User Select Type
menu.
Select Bal Port
menu.
Select Bal Port
menu. The user-defined differential matching circuit should
menu.
User File
SCPI Command
:CALC{1-16}:FSIM:SEND:DEEM:STA
T
:CALC{1-16}:FSIM:SEND:DEEM:
PORT1
:CALC{1-16}:FSIM:SEND:DEEM:
PORT2
:CALC{1-16}:FSIM:SEND:DEEM:
PORT3
:CALC{1-16}:FSIM:SEND:DEEM:
PORT4
:CALC{1-16}:FSIM:SEND:DEEM:
Select
PORT{1-4} NONE
:CALC{1-16}:FSIM:SEND:DEEM:
Select
PORT{1-4} USER
User
:CALC{1-16}:FSIM:SEND:DEEM:
PORT{1-4}:USER:FIL
:CALC{1-16}:FSIM:BAL:DMC:STAT
:CALC{1-16}:FSIM:BAL:DMC:BPOR1
:CALC{1-16}:FSIM:BAL:DMC:
BPOR{1-2}
:CALC{1-16}:FSIM:BAL:DMC:BPOR1
:CALC{1-16}:FSIM:BAL:DMC:
BPOR{1-2} NONE
:CALC{1-16}:FSIM:BAL:DMC:
BPOR{1-2} PLPC
:CALC{1-16}:FSIM:BAL:DMC:
BPOR{1-2} USER
Appendix D