Configuring The Network; Enabling/Disabling Network - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Setting and Using the Control and Management Functions

Configuring the Network

When you use the E5070B/E5071B by connecting it to your LAN, consult your network

administrator and make the setting of the LAN correctly.

This section describes how to set the following basic items necessary to connect the

E5070B/E5071B to the LAN (Local Area Network).

If you need detail network settings, consult your network administrator and perform

operation in the same way as the Windows 2000® PC.

You can enable/disable the network connection function of the E5070B/E5071B.

Follow these steps to enable/disable the network connection function.

Step 1. Use the LAN cable to connect the E5070B/E5071B to the LAN.

Step 2. Press

Step 3. Press

Step 4. Press

Step 5. Press

(Figure 13-10).

Figure 13-10

Network and Dial-up Connections window

"Enabling/disabling network" on page 434

"Setting IP address" on page 435

"Specifying computer name" on page 437

Network Setup

Network Configuration

to open the Network and Dial-up Connections window

E5070b E5071b