Step 8. To turn off marker(s), press the
follows:
Softkey
All OFF
Marker 1
Ref Marker
NOTE
In the preset configuration, the marker settings on traces in a channel are coupled (Marker
Couple is turned on). For marker coupling, refer to "Setting up markers for each
trace/Setting up markers for coupled operations between traces" on page 258.
Chapter 6
Analyzing Data on the Trace Using the Marker
Clear Marker Menu
to
Marker 9
Data Analysis
and then press one of the softkeys as
Function
Turns off all of the markers on the active trace
Turns off one of markers 1 through 9 on active
trace
Turns off reference markers on active trace
255