Agilent Technologies ENA Series User Manual page 444

Setting and Using the Control and Management Functions
Configuring the Network
Step 6. The Identification Changes dialog box (Figure 13-15) appears. Enter the computer name in
the
Figure 13-15 Identification Changes dialog box
Step 7. The Network Identification dialog box (Figure 13-16) appears. Click the
Figure 13-16 Network Identification dialog box
Step 8. In the Identification Changes dialog box, click the
Step 9. In the System Properties dialog box, click the
Step 10. The System Settings Change dialog box (Figure 13-17) appears. Click the
restart the E5070B/E5071B.
Figure 13-17 System Settings Change dialog box
NOTE Until the E5070B/E5071B is restarted, changed setting does not take effect.
438
box (1 in Figure 13-15).
Computer Name
button (2 in Figure 13-15).
OK
button (2 in Figure 13-14).
OK
button.
OK
button to
Yes
Chapter 13