Agilent Technologies ENA Series User Manual page 442

Setting and Using the Control and Management Functions
Configuring the Network
Step 6. The Local Area Connection Properties dialog box (Figure 13-12) appears. Select
(highlight)
button (2 in Figure 13-12).
Figure 13-12 Local Area Connection Properties dialog box
Step 7. The Internet Protocol (TCP/IP) Properties dialog box (Figure 13-13) appears. Click (select)
Use the following IP address
Figure 13-13), the subnet mask (3 in Figure 13-13), and the gateway address (4 in Figure
13-13).
If the IP address can be obtained automatically (if the DHCP server can be used), click
(select)
Figure 13-13 Internet Protocol (TCP/IP) Properties dialog box
436
Internet Protocol (TCP/IP)
(1 in Figure 13-13) and then enter the IP address (2 in
Obtain an IP address automatically
(1 in Figure 13-12) and then click the
(5 in Figure 13-13).
Properties
Chapter 13