Writing System Correction Data From Backup Memory To Removable Hard Disk - Agilent Technologies ENA Series User Manual

Writing System Correction Data from Backup Memory to Removable
Hard Disk
The following procedure shows how to write the system correction data stored in the
backup memory to the newly mounted removable hard disk.
Step 1. Turn on the E5070B/E5071B.
Step 2. Press
Step 3. Press
Step 4. A dialog box appears for you to select the program to be loaded. Select
RestoreSysCorFile.vba from the D:\Agilent\Service folder and then press the
Step 5. Press
Step 6. The RestoreSysCorFile dialog box appears (Figure 18-3). Click
Figure 18-3 RestoreSysCorFile Dialog Box
CAUTION
Once the program has terminated, restart the E5070B/E5071B to enable the system
correction data.
Chapter 18
.
in the softkey menu.
Load Project...
.
Information on Maintenance
Removing/Mounting Removable Hard Disk
.
OK
button.
Open
579