Agilent Technologies ENA Series User Manual page 98

Setting Measurement Conditions
Setting Window Displays
Step 5. Press the softkey corresponding to the item for which you want to set the display color.
Softkey
to
Data Trace 1 9
to
Mem Trace 1 9
Graticule Main
Graticule Sub
Limit Fail
Limit Line
Background
Step 6. Press .
Red
Step 7. Select the amount of red (R) from
Step 8. Press .
Green
Step 9. Select the amount of green (G) from
Step 10. Press .
Blue
Step 11. Select the amount of blue (B) from
Resetting the display colors to the factory state
You can reset the display colors in normal display and inverted display to the preset factory
state.
The selection procedure is as follows:
Step 1. Press .
Step 2. Press
Misc Setup
Step 3. Press
Color Setup
Step 4. Press (for normal display) or
Normal
Step 5. Press
Reset Color
Step 6. Press .
OK
92
Function
Specifies the data trace of traces 1 to 9
Specifies the memory trace of traces 1 to 9
Specifies the graticule label and the outer lines of graphs
Specifies the grid of graphs
Specifies the fail display in the limit test result
Specifies the limit line
Specifies the background
to .
0 5
to .
0 5
to .
0 5
.
.
Invert
.
(for inverted display).
Chapter 3