Agilent Technologies ENA Series User Manual page 520

Measurement Examples
Measuring an Unbalanced and Balanced Bandpass Filter
Step 4. Set the measurement parameter (mixed mode S-parameter) and data format for trace 3.
Setting Description
Unbalanced-balanced conversion of trace 3:
ON
Measurement parameter: S
Data format: Smith chart (marker display:
R+jX)
Step 5. Set the measurement parameter (mixed mode S-parameter) and data format for trace 4.
Setting Description
Unbalanced-balanced conversion of trace 4:
ON
Measurement parameter: S
Data format: Smith chart (marker display:
R+jX)
Figure 15-28 shows the setting results for each parameter.
Figure 15-28 Measurement results after unbalanced-balanced conversion
514
Key Operation
BalUn
ss11
Key Operation
BalUn
dd22
- -
Fixture Simulator
(turns it )
ON
-
Sss11
- -
Smith R + jX
- -
Fixture Simulator
(turns it )
ON
-
Sdd22
- -
Smith R + jX
Chapter 15
-
-