Agilent Technologies ENA Series User Manual page 92

Setting Measurement Conditions
Setting the Scales
Figure 3-11 Manual scale setup on a rectangular display format
Manually setting scales on a rectangular display format
Step 1. Press
which scale features will be adjusted.
Step 2. Press
Step 3. Press the softkey that corresponds to the particular feature that needs to be adjusted.
Softkey
Divisions
Scale/Div
Reference Position
Reference Value
NOTE It is also possible to turn off the display of graticule labels. For details, refer to "Turning off
the display of graticule labels" on page 88.
86
(or ) and
.
(or ) to select the trace for
Function
Defines the number of divisions on the Y-axis.
Defines the number of increments per division
on the Y-axis.
Defines the position of the reference line.
Defines the value corresponding to the
reference line.
Chapter 3