Setting The Internal Clock; Setting The Date And Time - Agilent Technologies ENA Series User Manual

Setting the Internal Clock

The E5070B/E5071B has the built-in clock that keeps track of the date and time. This
clock is used for the following functions.
• To display the current date and time in the instrument status bar at the lower part of the
screen
• To write date and time information when saving internal data or a VBA program

Setting the Date and Time

Step 1. Press
Step 2. Press
Step 3. Press
Step 4. Press
The dialog box in Figure 13-4 appears.
Figure 13-4 Date/Time Properties Dialog Box ("Date & Time" Tab)
Step 5. Set the date in the
Step 6. Press the
The dialog box in Figure 13-5 appears.
Chapter 13
Setting and Using the Control and Management Functions
.
.
Misc Setup
.
Clock Setup
.
Set Date and Time
area, and set the time in the
Date
tab.
Time Zone
Setting the Internal Clock
area.
Time
429