Setting and Using the Control and Management Functions
System Recovery
Step 6. The following screen appears. Check that Floppy is selected (highlighted) (if Floppy is not
selected, select it with
Step 7. The message as shown below appears. Press
create user backup image, press
Agilent Technologies System Utilities
Recovery & Backup Options for the E5070/71B
Choose One of the following:
_________________________________________________________________
_________________________________________________________________
Enter a Choice: _
NOTE
If the above message does not appear, the instrument or the disk for the system recovery is
at fault; contact your local Agilent customer center listed at the end of this manual or
distributor.
456
of the keyboard), and press
1. Recover Factory Backup Image
2. Create User Backup Image
3. Recover User Backup Image
4. Exit
of the keyboard.
of the keyboard. If you want to cancel the
here.
Chapter 13