Agilent Technologies ENA Series User Manual page 695

Key Operation Function
(Continued)
Allocate Channels
Displays channel windows by splitting the screen vertically into four equal
parts and then bisecting each window horizontally, with channels 1, 3, 5, and
7 displayed in left windows from top to bottom, and channels 2, 4, 6, and 8
displayed in right windows from top to bottom.
Displays channels 1, 2, and 3 from the left of the upper part, channels 4,5, and
6 from the left of the middle part, and channels 7, 8, and 9 from the left of the
lower part in the display area divided into 9 as softkey labels.
Displays channels 1, 2, 3, and 4 from the left of the upper part, channels 5, 6,
7, and 8 from the left of the middle part, and channels 9, 10, 11, and 12 from
the left of the lower part in the display area divided into 12 as softkey labels.
Displays channels 1, 2, and 3 from the left of the 1st line, channels 4, 5, and 6
from the left of the 2nd line, channels 7, 8, and 9 from the left of the 3rd line,
and channels 10, 11, and 12 from the left of the 4th line in the display area
divided into 12 as softkey labels.
Displays channels 1, 2, 3, and 4 from the left of the 1st line, channels 5, 6, 7,
and 8 from the left of the 2nd line, channels 9, 10, 11, and 12 from the left of
the 3rd line, and channels 13, 14, 15, and 16 from the left of the 4th line in the
display area divided into 16 as softkey labels.
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for setting the number of traces.
Number of Traces
Sets the number of traces to one for the active channel.
1
Sets the number of traces to two for the active channel.
2
Sets the number of traces to three for the active channel.
3
Sets the number of traces to four for the active channel.
4
Sets the number of traces to five for the active channel.
5
Sets the number of traces to six for the active channel.
6
Sets the number of traces to seven for the active channel.
7
Sets the number of traces to eight for the active channel.
8
Sets the number of traces to nine for the active channel.
9
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for setting up the trace display arrangement. Traces are displayed based on the order determined
Allocate Traces
from the graph arrangement currently being used. If the number of traces is less than the number of graphs,
nothing will be displayed in the extra area(s). If the number of traces is more than the number of graphs, the
remaining traces will be displayed by going back to the first graph, overlapping existing traces.
Displays channel 1 using the entire channel window.
Displays graphs by bisecting the screen horizontally with graph 1 on the left
and graph 2 on the right.
Displays graphs by bisecting the screen vertically, with graph 1 displayed
above graph 2.
Displays graphs by splitting the screen vertically (with the left window
occupying 2/3 of the screen), with graph 1 on the left and graph 2 on the
right.
Displays graphs by splitting the screen vertically (with the upper window
occupying 2/3 of the screen), and graph 1 displayed above graph 2.
Displays graphs by trisecting the screen horizontally, with graphs 1, 2, and 3
displayed from left to right.
Displays graphs by trisecting the screen vertically with graphs 1, 2, and 3
arranged from top to bottom.
Appendix D
Softkey Functions
Display Menu
SCPI Command
:DISP:SPL D12_34_56_78
:DISP:SPL D123_456_789
:DISP:SPL D1234__9ABC
:DISP:SPL D123__ABC
:DISP:SPL D1234_CDEF
:CALC{1-16}:PAR:COUN 1
:CALC{1-16}:PAR:COUN 2
:CALC{1-16}:PAR:COUN 3
:CALC{1-16}:PAR:COUN 4
:CALC{1-16}:PAR:COUN 5
:CALC{1-16}:PAR:COUN 6
:CALC{1-16}:PAR:COUN 7
:CALC{1-16}:PAR:COUN 8
:CALC{1-16}:PAR:COUN 9
:DISP:WIND{1-16}:SPL D1
:DISP:WIND{1-16}:SPL D1_2
:DISP:WIND{1-16}:SPL D12
:DISP:WIND{1-16}:SPL D112
:DISP:WIND{1-16}:SPL D1_1_2
:DISP:WIND{1-16}:SPL D123
:DISP:WIND{1-16}:SPL D1_2_3
689