Setting The Preset Function; Showing/Hiding The Confirmation Buttons When Presetting; Setting The User Preset Function - Agilent Technologies ENA Series User Manual

Setting the preset function

Showing/hiding the confirmation buttons when presetting

The preset function can be executed without displaying the
when pressing the preset button of the E5070B/E5071B.
Operational procedure
Step 1. Press
Step 2. Press
Step 3. Press
Step 4.
Confirm

Setting the user preset function

You can save the instrument state of the E5070B/E5071B into a file in the mass storage,
and then recall it with the preset function to reproduce that state.
If no user preset instrument state is stored, you cannot set the user preset function. For
more information on saving instrument states, see "Saving a user-preset instrument state"
on page 450.
Operational procedure
Step 1. Press
Step 2. Press
Step 3. Press
Step 4. Press
Step 5. Use one of the following keys for the desired setting.
Table 13-3
Softkey
Factory
User
Cancel
Chapter 13
Setting and Using the Control and Management Functions
.
.
Misc Setup
.
Preset Setup
to toggle on (show)/off (hide) the confirmation buttons.
.
.
Misc Setup
.
Preset Setup
.
State
Function
Specifies the normal preset function.
Specifies the user-preset function.
Returns to the softkey display in one upper level.
Setting the preset function
and softkey buttons
OK Cancel
449